Vòi bếp Dornbracht
-
Single-lever mixer pull-down with spray function – Brushed Durabrass 33 870 875-280010
Features
- 9-1/2″ Projection
- Swiveling spout 360°
- Optional restriction, swivels 110°
- Laminar and spray function
- Total height 19-5/8″
- 9-1/2″ height to aerator/spout outlet
- 1-3/8″ hole diameter
- 2x 10 mm flexible supply lines including 3/8″ US adapters
- 59″ metal shower hose
- Sprayface with descaling system
- Water flow rate limited to max. 1.5 gpm
- lead-free
- Codes & Standards
- NSF/ANSI 372
- California Energy Commission (CEC)
- ASME A112.18.1/CSA B125.1
- NSF/ANSI/CAN 61
- ADA
- (ADA)
- Internal backflow preventer.
- Push button locks into spray mode when pressed. To switch back to laminar flow the water must be turned off.
Đọc tiếpXem nhanh -
PIVOT Single-lever mixer – platinum 33 845 875-08
Features
- 552 mm projection
- pivotable spout 360°
- air-enriched flow
- height of mixer 372 mm
- height up to aerator 290 mm
- rosette 55 mm
- hole diameter 35 mm
- max. flow 8 l/min at 3 bar flow pressure
- lead-free
- In order to compensate for the disproportionately high increase in the cost of materials, we are unfortunately forced to charge a precious metal surcharge of 10% for this article as from 1st June 2020.
- The surcharge is not included in price shown.
Đọc tiếpXem nhanh -
BAR TAP Two-hole mixer with individual rosettes – platinum matt 32 805 680-06
Features
- 165 mm projection
- pivotable spout 360°
- air-enriched flow
- height of mixer 230 mm
- height up to laminar flow regulator 205 mm
- individual rosette 55 x 55 mm
- hole diameter spout 35 mm
- single-lever mixer hole diameter 44 mm
- max. flow 8 l/min at 3 bar flow pressure
- lead-free
- In order to compensate for the disproportionately high increase in the cost of materials, we are unfortunately forced to charge a precious metal surcharge of 10% for this article as from 1st June 2020.
- The surcharge is not included in price shown.
- Operating unit can be positioned freely.
Đọc tiếpXem nhanh -
POT FILLER Cold-water valve – Dark Platinum matt 30 805 875-99
Features
- 500 mm projection
- pivoting spout
- laminar flow
- cold water only
- max. flow 5.7 l/min at 3 bar flow pressure
- lead-free
Đọc tiếpXem nhanh -
Single-lever mixer Pull-out with spray function – brushed Durabrass 33 870 760-28
Features
- 225 mm projection
- pivotable spout 130°
- air-enriched flow and spray flow
- height of mixer 167 mm
- height up to aerator 137 mm
- hole diameter 35 mm
- fabric braided hose 1500 mm
- max. flow 8.3 l/min at 3 bar flow pressure
- lead-free
- In order to compensate for the disproportionately high increase in the cost of materials, we are unfortunately forced to charge a precious metal surcharge of 10% for this article as from 1st June 2020.
- The surcharge is not included in price shown.
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh -
Profi single-lever mixer – brushed Durabrass 33 865 895-28
Features
- 200 mm projection
- Flexible silicone hose with large operating range of up to 350 mm
- pivotable 360°
- optional limiting, pivoting 110°
- air-enriched flow and spray flow
- height of mixer 451 mm
- height up to aerator 119 mm
- hole diameter 35 mm
- sprayface with anti-scaling system
- max. flow 9.5 l/min at 3 bar flow pressure
- lead-free
- In order to compensate for the disproportionately high increase in the cost of materials, we are unfortunately forced to charge a precious metal surcharge of 10% for this article as from 1st June 2020.
- The surcharge is not included in price shown.
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh -
Tara Ultra Single-lever mixer – platinum matt 33 800 875-06
Features
- 201 mm projection
- Pivotable spout 360°
- Air-enriched flow
- Height of mixer 373 mm
- Height up to aerator 240 mm
- Hole diameter 35 mm
- Max. flow 8 l/min at 3 bar flow pressure
- Lead-free
Đọc tiếpXem nhanh -
MEM Dispenser without rosette – brushed Durabrass 82 424 970-28
Features
-
124 mm projection
-
500 ml bottle
-
Can be filled from the top
-
Rotating pump head
-
Height 125 mm
-
Width 30mm
-
Hole diameter 25 mm
Đọc tiếpXem nhanh -
-
Single-lever mixer – platinum 33 800 760-08
Features
- 220 mm projection
- pivotable spout 130°
- air-enriched flow
- height of mixer 167 mm
- height up to aerator 145 mm
- hole diameter 35 mm
- max. flow 8 l/min at 3 bar flow pressure
- lead-free
Đọc tiếpXem nhanh -
Single-lever mixer pull-down with spray function – Dark Platinum matte 33 870 875-990010
Features
- 9-1/2″ Projection
- Swiveling spout 360°
- Optional restriction, swivels 110°
- Laminar and spray function
- Total height 19-5/8″
- 9-1/2″ height to aerator/spout outlet
- 1-3/8″ hole diameter
- 2x 10 mm flexible supply lines including 3/8″ US adapters
- 59″ metal shower hose
- Sprayface with descaling system
- Water flow rate limited to max. 1.5 gpm
- lead-free
- Codes & Standards
- NSF/ANSI 372
- California Energy Commission (CEC)
- ASME A112.18.1/CSA B125.1
- NSF/ANSI/CAN 61
- ADA
- (ADA)
- Internal backflow preventer.
- Push button locks into spray mode when pressed. To switch back to laminar flow the water must be turned off.
Đọc tiếpXem nhanh -
PIVOT Single-lever mixer – brushed Durabrass 33 845 875-28
Features
- 552 mm projection
- pivotable spout 360°
- air-enriched flow
- height of mixer 372 mm
- height up to aerator 290 mm
- rosette 55 mm
- hole diameter 35 mm
- max. flow 8 l/min at 3 bar flow pressure
- lead-free
- In order to compensate for the disproportionately high increase in the cost of materials, we are unfortunately forced to charge a precious metal surcharge of 10% for this article as from 1st June 2020.
- The surcharge is not included in price shown.
Đọc tiếpXem nhanh -
BAR TAP Two-hole mixer with individual rosettes – platinum 32 805 680-08
Features
- 165 mm projection
- pivotable spout 360°
- air-enriched flow
- height of mixer 230 mm
- height up to laminar flow regulator 205 mm
- individual rosette 55 x 55 mm
- hole diameter spout 35 mm
- single-lever mixer hole diameter 44 mm
- max. flow 8 l/min at 3 bar flow pressure
- lead-free
- In order to compensate for the disproportionately high increase in the cost of materials, we are unfortunately forced to charge a precious metal surcharge of 10% for this article as from 1st June 2020.
- The surcharge is not included in price shown.
- Operating unit can be positioned freely.
Đọc tiếpXem nhanh
Vòi chậu Dornbracht
-
VAIA Wall-mounted basin mixer without pop-up waste – polished chrome 36 712 809-00
Features
- 190 mm projection
- Fixed spout
- Circular, air-enriched flow
- Hole diameter valve 37 mm
- Hole diameter spout 40 mm
- Rosettes Ø 60 mm
- Max. flow 5.7 l/min
- Lead-free
Đọc tiếpXem nhanh -
TARA Wall-mounted basin mixer without pop-up waste – matt black 36 712 882-33
Features
- 190 mm projection
- Circular, air-enriched flow
- Hole diameter valve 40 mm
- Hole diameter spout 40 mm
- Rosette Ø 55 mm
- Max. flow 7 l/min
- Lead-free
- WRAS: 1603008
Đọc tiếpXem nhanh -
CYO Three-hole basin mixer with pop-up waste – platinum matt 20 713 811-06
Features
- 167 mm projection
- Fixed spout
- Rectangular, air-enriched flow
- Height of mixer 198 mm
- Height up to aerator 133 mm
- Hole diameter spout 35 mm
- Deck valve hole diameter 32 mm
- Handle Ø 60mm
- Max. flow 4.5 l/min
- Lead-free
- NOTE: The handle inserts must be ordered separately from the fittings!
Đọc tiếpXem nhanh -
TARA Wall-mounted basin mixer without pop-up waste – Dark Platinum matt 36 707 882-99
Features
- 160 mm projection
- Fixed spout
- Circular, air-enriched flow
- Hole diameter valve 40 mm
- Hole diameter spout 40 mm
- Rosette Ø 55 mm
- Max. flow 7 l/min
- Lead-free
- WRAS: 1603008
Đọc tiếpXem nhanh -
TARA Wall-mounted basin mixer without pop-up waste – platinum matt 36 712 892-06
Features
- 190 mm projection
- Fixed spout
- Circular, air-enriched flow
- Hole diameter valve 40 mm
- Hole diameter spout 40 mm
- Rosette Ø 55 mm
- Max. flow 7 l/min
- Lead-free
- WRAS: 1603008
Đọc tiếpXem nhanh -
TARA Three-hole basin mixer with pop-up waste – platinum 20 710 892-08
Features
-
135 mm projection
-
Pivotable spout 360°
-
Circular, air-enriched flow
-
Height of mixer 270 mm
-
Height up to aerator 161 mm
-
Hole diameter valve 32 mm
-
Hole diameter spout 35 mm
-
Rosette Ø 55 mm
-
2x screw-in M 10 x 1 pressure hose, leak-tested
-
Max. flow 7 l/min
-
Lead-free
-
WRAS: 1703013
-
Only suitable for basins with an overflow.
Đọc tiếpXem nhanh -
-
Symetrics Wall-mounted basin spout without pop-up waste – brushed Durabrass 13 805 980-28
Features
-
220 mm projection
-
Fixed spout
-
Circular, air-enriched flow
-
Hole diameter 37 mm
-
Rosette 60 x 60 mm
-
1/2″ connection
-
Plug-link mounting
-
Max. flow 7 l/min
-
Lead-free
-
WRAS: 1904065
-
For Touchfree control please order eSet Touchfree WITH or WITHOUT temperature adjustment
Đọc tiếpXem nhanh -
-
CL.1 Wall valve anti-clockwise closing hot 1/2″ – polished chrome 36 617 707-00
Features
- With WAVES structure
- Rosette 60 x 60 mm
- With hot marking
- Head part with cut-to-length spindle and sleeve
Đọc tiếpXem nhanh -
TARA – Deck valve anti-clockwise closing – brushed Durabrass 20 000 883-28
Features
- Hole diameter 32 mm
- Rosette Ø 55 mm
Đọc tiếpXem nhanh -
META Wall-mounted single-lever basin mixer without pop-up waste – matt black 36 861 660-33
Features
- 250 mm projection
- Fixed spout
- Circular, air-enriched flow
- Hole diameter spout 37 mm
- Hole diameter single-lever mixer 57 mm
- Rosette for spout Ø 60mm
- Rosette for mixer Ø 78mm
- Max. flow 5.7 l/min
- Lead-free
Đọc tiếpXem nhanh -
Symetrics Deck-mounted basin spout with pop-up waste – brushed Durabrass 13 713 980-28
Features
- 165 mm projection
- Fixed spout
- Circular, air-enriched flow
- Height of mixer 230 mm
- Height up to aerator 205 mm
- Hole diameter 35 mm
- 2x screw-in M 10 x 1 pressure hose, leak-tested
- Rosette 60 x 60 mm
- Max. flow 7 l/min
- Lead-free
- Only suitable for basins with an overflow.
Đọc tiếpXem nhanh -
TARA Single-hole bidet mixer with pop-up waste – Dark Platinum matt 24 510 892-99
Features
-
124 mm projection
-
Ball-joint pivotable through 15° (in any direction)
-
Circular, air-enriched flow
-
Height of mixer 180 mm
-
Height up to aerator 123 mm
-
Hole diameter 35 mm
-
Rosette Ø 59 mm
-
2x screw-in M 10 x 1 pressure hose, leak-tested
-
Max. flow 7 l/min
Đọc tiếpXem nhanh -
Vòi bồn tắm Dornbracht
-
Deck valve clockwise closing cold or hot – Dark Platinum matt 20 000 360-99
Features- hole diameter 32 mm
- rosette Ø 55 mm
- supplied with porcelain inserts for both HOT and COLD
Đọc tiếpXem nhanh -
Single-lever bath mixer for wall mounting with hand shower set – platinum matt 33 233 660-06
Features
- 202 mm projection
- complete hand shower set: normal flow
- spout: circular, air-enriched flow
- complete hand shower set with anti-scale system
- automatic bath/shower diverter
- slide-on rosettes Ø 60 mm
- gauge 150 mm – 15 mm
- 1/2″ connection
- metal shower hose 1250mm with integrated anti-twist protection
- shower holder rosette Ø 57mm
- max. flow 14 l/min at 3 bar flow pressure
- max. flow for complete hand shower set 6.8 l/min
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh -
Bath thermostat for wall mounting with hand shower set – chrome matt 34 234 979-93
Features
- 210 mm projection
- complete hand shower set: normal flow
- spout: circular, air-enriched flow
- complete hand shower set with anti-scale system
- rotary diverter with volume control and shut-off function
- slide-on rosettes Ø 60 mm
- 1/2″ connection
- gauge 150 mm – 15 mm
- metal shower hose 1250mm with integrated anti-twist protection
- shower holder rosette Ø 57mm
- max. flow 16.9 l/min at 3 bar flow pressure
- max. flow for complete hand shower set 6.8 l/min
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh -
Three-hole single-lever bath mixer for bath rim or tile edge installation – polished chrome 27 412 845-00
Features
- 200 mm projection
- spout: circular, air-enriched flow
- complete hand shower set with anti-scale system
- automatic bath/shower diverter
- height of mixer 141 mm
- height up to aerator 88 mm
- hole diameter spout 32 mm
- hole diameter single-lever mixer 35 mm
- hole diameter for complete hand shower set 32 mm
- rosette for complete hand shower set Ø 50mm
- metal shower hose 1750mm with integrated anti-twist protection
- max. flow 16.9 l/min at 3 bar flow pressure
- max. flow for complete hand shower set 6.8 l/min
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh -
Five-hole bath mixer for bath rim or tile edge installation – polished chrome 27 523 811-00
Features
- 167 mm projection
- rectangular, air-enriched flow
- height of mixer 198 mm
- height up to aerator 133 mm
- complete hand shower set: normal flow
- complete hand shower set with anti-scale system
- hole diameter spout mm
- hole diameter valve mm
- rosette for complete hand shower set 60 x 60mm
- handle Ø 60mm
- metal shower hose 1750mm with integrated anti-twist protection
- max. flow 23.8 l/min at 3 bar flow pressure
- max. flow for complete hand shower set 6.8 l/min
- NOTE: The handle inserts must be ordered separately from the fittings!
Đọc tiếpXem nhanh -
Hand shower set for bath rim or tile edge installation – chrome matt 27 702 660-93
Features
- normal flow
- with anti-scale system
- rosette Ø 60 mm
- hole diameter 32 mm
- metal shower hose 1750mm with integrated anti-twist protection
- max. flow 6.8 l/min
- Two-piece design allows hose to later be changed without dismantling the fitting.
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh -
bath spout for wall mounting – Dark Platinum matt 13 801 811-99
Features
- 190 mm projection
- rectangular, air-enriched flow
- hole diameter 37 mm
- 1/2″ connection
- max. flow 23.8 l/min at 3 bar flow pressure
Đọc tiếpXem nhanh -
Two-hole bath mixer for free-standing assembly with hand shower set – polished chrome 25 943 819-00
Features
- 221 mm projection
- pivotable spout 360°
- hand shower: normal flow
- spout: circular, air-enriched flow
- hand shower with anti-scale system
- rotary diverter for bath/shower
- total height 920 mm
- stand pipes height 628 mm
- height up to aerator 816 mm
- slide-on rosettes Ø 100 mm
- gauge 150 mm
- metal shower hose 1250mm with integrated anti-twist protection
- pivotable shower holder on the right foot
- max. flow 24.6 l/min at 3 bar flow pressure
- max. hand shower flow 6.8 l/min
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh -
Two-way diverter – polished chrome 29 126 705-00
Features
- rotary diverter
- hole diameter 37 mm
- rosette 60 x 60 mm
- 1/2″ connection
- max. flow 23.5 l/min at 3 bar flow pressure
- Not suitable for combining with Perfecto (12 614 970 90).
Đọc tiếpXem nhanh -
Two-way diverter for bath rim or tile edge installation – platinum 29 140 892-08
Features
- automatic bath/shower diverter
- hole diameter 32 mm
- rosette Ø 55 mm
- 1/2″ connection
- max. flow 64.9 l/min at 3 bar flow pressure
Đọc tiếpXem nhanh -
Single-lever bath mixer for bath rim or tile edge installation – polished chrome 29 300 845-00
Features
- without rosette
- hole diameter 35 mm
- max. flow 35.7 l/min at 3 bar flow pressure
Đọc tiếpXem nhanh -
Concealed single-lever mixer with cover plate with integrated shower connection – platinum matt 36 045 970-06
Features
- cover plate 80 x 80 mm
- Intrinsic protection against back flow.
- Article cannot be extended, please check the depth of the installation location!
Đọc tiếpXem nhanh
Sen tắm Dornbracht
-
CL.1 Hand shower 6.8 l/min – polished chrome 28 016 979-000010
Features
-
3 individual sprays (standard, soft, massage) + 2 combinations (standard+soft, soft+massage)
-
Descaling system
-
Ø 5-1/8
-
1/2″ connection
-
Water flow rate limited to max. 1.8 gpm
-
Internal backflow preventer.
Đọc tiếpXem nhanh -
-
CL.1 Hand shower 6.8 l/min – black matte 28 017 979-330010
Features
-
Standard spray mode
-
Descaling system
-
Ø 5-1/8
-
1/2″ connection
-
Water flow rate limited to max. 1.8 gpm
-
Internal backflow preventer.
Đọc tiếpXem nhanh -
-
CL.1 Hand shower 15 l/min – platinum 28 018 979-08
Features
- Three settings: normal flow, soft flow, massage flow
- With anti-scale system
- Spray head Ø 100mm
- 1/2″ connection
- Max. flow 15 l/min
- WRAS: 1704043
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh -
CL.1 Wall valve anti-clockwise closing hot 1/2″ – polished chrome 36 617 707-00
Features
- With WAVES structure
- Rosette 60 x 60 mm
- With hot marking
- Head part with cut-to-length spindle and sleeve
Đọc tiếpXem nhanh -
Lissé Concealed thermostat with two function volume control – polished chrome 36 426 845-00
Features
-
Rotary diverter with volume control and shut-off function
-
Cover plate 150 x 90 mm
-
Temperature control handle with safety limit stop at 38°C
-
Hot water temperature limiter, can be preset
Đọc tiếpXem nhanh -
-
WATER TUBE Kneipp hose black 2000 mm – brushed Durabrass 28 286 979-28
Features
-
Hose nozzle with sleeve M33
-
With holding ring
Đọc tiếpXem nhanh -
-
Madison Concealed thermostat with three function volume control – polished chrome 36 427 977-00
Features
-
Rotary diverter with volume control and shut-off function
-
Cover plate Ø 175 mm
-
Temperature control handle with safety limit stop at 38°C
-
Hot water temperature limiter, can be preset
-
WRAS: 1906098
Đọc tiếpXem nhanh -
-
CYO Wall valve clockwise closing cold 1/2″ – Dark Platinum matt 36 607 812-99
Features
- Without rosette
- Handle Ø 60mm
- Head part with cut-to-length spindle and sleeve
- For three-hole basin mixers and five-hole bath mixers
- NOTE: The handle inserts must be ordered separately from the fittings!
Đọc tiếpXem nhanh -
CL.1 WATER BAR Concealed body spray – platinum 36 517 979-08
Features
-
Rain flow
-
With anti-scale system
-
Cover plate 240 x 60 mm
-
1/2″ connection
-
Max. flow 6 l/min
Đọc tiếpXem nhanh -
-
CL.1 Wall valve anti-clockwise closing hot 1/2″ – Dark Platinum matt 36 607 707-99
Features
-
Rosette 60 x 60 mm
-
With hot marking
-
Head part with cut-to-length spindle and sleeve
Đọc tiếpXem nhanh -
-
VAIA Wall valve clockwise closing 3/4″ – polished chrome 36 608 819-00
Features
-
Rosette Ø 60 mm
-
Head part with cut-to-length spindle and sleeve
Đọc tiếpXem nhanh -
-
Madison Wall elbow – platinum matt 28 450 370-06
Features
- 1/2″ shower outlet
- Rosette Ø 60 mm
- 1/2″ connection
- Intrinsic protection against back flow.
Đọc tiếpXem nhanh
Phụ Kiện Dornbracht
-
Concealed products xGATE Concealed mixer valve with volume control – 35 691 97090
Features
- Red brass, lead-free
- 2x female thread 1/2″ connections
- 1x female thread 1/2″ outlet
- Dust cover
- 2x anti-water packing
- Soundproofing
- Gauge 60 mm
- Suitable for xGRID (when using installation track + 12 mm recess depth)
- Only for use with basin spouts or hand shower
- This product can be combined with the xGrid track. For more details, see page ZZZ.
Đọc tiếpXem nhanh -
CL.1 Cover plate for the concealed WC cistern made by TeCe – platinum 12 660 979-08
Features
-
Cover plate 150 x 240 x 15 mm
-
Flush handle with rotary operation and two-volume technology (full flush/partial flush)
Đọc tiếpXem nhanh -
-
Madison Tissue holder without cover – brushed Durabrass 83 500 361-28
Features
-
Width 145mm
-
Height 120 mm
-
95 mm projection
Đọc tiếpXem nhanh -
-
Angle valve – platinum matt 22 901 782-06
Features
- rosette 60 x 60 mm
- hose covering 200mm, for shortening
- 1/2″ connection
Đọc tiếpXem nhanh -
Metal shower hose 1/2″ x 1/2″ x 1250 mm – Dark Platinum matt 28 104 970-99
Product Details
- Finish type :Dark Platinum Matt
- Product concept :Series–various
- Product type BU : Functional Part
- Brand : Dornbracht
Đọc tiếpXem nhanh -
Two-way diverter – platinum matt 29 126 740-06
Features
- rotary diverter
- hole diameter 37 mm
- without rosette
- handle Ø 60mm
- 1/2″ connection
- max. flow 23.5 l/min at 3 bar flow pressure
- Not suitable for combining with Perfecto (12 614 970 90).
Đọc tiếpXem nhanh -
Two-way diverter for bath rim or tile edge installation – chrome matt 29 140 892-93
Features
- automatic bath/shower diverter
- hole diameter 32 mm
- rosette Ø 55 mm
- 1/2″ connection
- max. flow 64.9 l/min at 3 bar flow pressure
Đọc tiếpXem nhanh -
Single-lever bath mixer for bath rim or tile edge installation – polished chrome 29 300 845-00
Features
- without rosette
- hole diameter 35 mm
- max. flow 35.7 l/min at 3 bar flow pressure
Đọc tiếpXem nhanh -
Wall valve clockwise closing 1/2″ – platinum 36 607 892-08
Features
- rosette Ø 55 mm
- head part with cut-to-length spindle and sleeve
Đọc tiếpXem nhanh


























































